Industrial Centre

 Occupational & Environmental Safety (OES)

 

ycoords="3, 0, 87, 17">

 

Staff Publications

 

Members of Safety Research & Consultancy Group:

Chan, C.S. (1998) An overview of Job Hazard Analysis Technique. Paper presented at 1998 International Symposium on Safety Science and Technology (ISSST), Beijing, October 1998

 

Chan, C.S. (2000) Job Safety Training. Proceedings of the 6th International Conference on Modern Industrial Training (CMIT), Beijing. pp518-522.

 

Chan, C.S. (1999) An overview of Job Hazard Analysis Technique. Paper published at the Asia Engineer of HKIE, May 1999

 

Chan, C.S. & Kwok, A. (2000) Safety Auditors Training Scheme. Paper presented at 6th Annual Conference of the Australian & New Zealand Association of Occupational Health and Safety Educators (ANZAOHSE), Hong Kong

 

Chan, C.S. & Lam, H. (2000) Metal Scaffolding Safety. Paper presented at 6th Annual Conference of the Australian & New Zealand Association of Occupational Health and Safety Educators (ANZAOHSE), Hong Kong 

 

Kwok, A. (1999) A Proactive Approach to Monitor Construction Safety Using Indicators of Safety and Quality Audits. Paper presented at International Conference for the Implementation of Safety and Health in Construction Site (CIB-W99), Hawaii

 

Kwok, A. (2000) An Evaluation of Acceptance on Construction (Design and Management) Regulations in Hong Kong, Paper presented at 6th Annual Conference of the Australian & New Zealand Association of Occupational Health and Safety Educators (ANZAOHSE), Hong Kong

 

Kwok, A & Au, F (1994) Learning by Participation - a real life approach to the practical training in Civil & Building Construction Engineering, Proceedings of The 4th International Conference on Modern Industrial Training, Xian. pp148-149

 

Kwok A, Tang S.L. & Poon, S.W. (1996) Perception of Construction Professionals on Construction Safety and Imminent Need in Health and Safety Training in Hong Kong, Proceedings of International Conference on Construction Training by CITA, Hong Kong, pp.248-256

 

Kwok, A (1997) Safety Management Training in Construction Industry in Hong Kong, Proceedings of The 5th International Conference on Modern Industrial Training, Jinan, October 1997 

 

Kwok, A. & Chan, C.S. (2000) Training of Safety Auditors. Proceedings of the 6th International Conference on Modern Industrial Training (CMIT), Beijing. pp469-474

 

Ma, C.H., Kwok, A. & Ho, K.L. (2000) A Wilder Spectrum in University Research Project to Underpin Safety Legislation Development. Proceedings of the 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators, Hong Kong. (CD-ROM) pp321-330.

 

Ma C.H., Poon, W.F. & Ho, K.L.  (2000) Statistical Analysis on Factors in Reducing Construction Site Accident Frequency Rate in Hong Kong. Proceedings of the 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators, Hong Kong. (CD-ROM) pp341-355.

 

Ma C.H. & Ho, K.L. (2000) A Modelling Method to Develop Safety Management System. Proceedings of the 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators, Hong Kong. (CD-ROM) pp311-320.

 

Ma C.H., Chow, L.Y. & Chung, F. (2000)Minimum Effort and Shortest Development Time to Safety and Health Management System. Proceedings of the 6th International Conference on Modern Industrial Training (CMIT), Beijing. pp537-543. 

 

Lam, H. (1998) Excavation in Hong Kong. Paper presented at International Symposium "Engineering Education98"

 

Lam, H. (2000) Metal Scaffolding Training. Proceedings of the 6th International Conference on Modern Industrial Training (CMIT), Beijing. pp497-501.

 

Poon, P.S.K. & Reed, S. (2000). Double Marking of Coursework Masters Research Projects. Proceedings of the 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators (in CD-ROM format), Hong Kong.

 

Poon, S.K. (2000). A "Yin & Yang" Duality Approach to an Integrated Curriculum. Proceedings of the 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators (in CD-ROM format), Hong Kong.

 

Poon, S.K. (1998). An Issue-based Framework for Open Learning in Safety Education and Professional Development. Proceedings of the 3rd International Open Learning Conference, Brisbane, Australia, pp. 421-428.

 

Poon, S.K., Reed, S. & Tang, C. (1997). Problem-based Learning in Distance Education. Proceedings of the 5th International Conference on Modern Industrial Training, Jinan, China, pp. 593-600. (PDF Version)

 

Ho,S.L, Wong,H.C. & Poon,S.K. (1996). Thermal characteristics of traction motors with regenerative braking. Proceedings of the Australasian Universities Power Engineering Conference. Melbourne, Australia, vol. 1, pp. 495-500.

 

Ho,S.L, Fu,W.N, Wong,H.C. & Poon,S.K. (1996). Evaluation of high-order harmonic currents of induction motors using a variant of Crank-Nicholson's Method. Procceedings of the Australasian Universities Power Engineering Conference, Melbourne, Australia, vol. 1, pp. 287-292.

 

Ho,S.L, Wong,H.C. & Poon,S.K. (1996). Investigation into the causes of breakdown in a 2 MVA resin transformer. Proceedings of the Australasian Universities Power Engineering Conference, Melbourne, Australia, vol. 2, pp. 383-388.

 

Zhang,Y.L, Ho,S.L, Xie,G.D, Wong,H.C. & Poon,S.K. (1996). 3D mesh automatic generation for permanent magnet disc-type machines. Proceedings of the Australasian Universities Power Engineering Conference, Melbourne, Australia, vol. 1, pp. 501-505.

 

Ho,S.L, Wong,H.C. & Poon,S.K. (1996). Starting problems of a 945 kW induction motor in a sewage plant. Proceedings of the Australasian Universities Power Engineering Conference. Melbourne, Australia, vol. 1, pp. 519-524.

 

Poon,S.K. & Wong, H.C. (1995). An Overview of the Philosophy and Practice of Training in the Hong Kong Polytechnic University's Industrial Centre. Proceedings of the 6th World Conference on Continuing Engineering Education, Brazil. (CD-ROM).

 

Poon,S.K. and Lee,T.C. (1993). Electrical Discharge Machining of Particulate Metal Matrix Composites. Proceedings of the ASM 1993 Materials Congress, Pittsburgh, Pennsylvannia, USA, pp. 43-50.

 

Poon,S.K. (1994). Managing Multi-media Projects for Training'. Proceedings of the 4th International Conference on Modern Industrial Training. Xian, China, pp. 379-389.

 

Poon,S.K. (1991). Training in Quality and Reliability - A Joint Partnership between Education and Industry. Proceedings of the Third International Conference on Modern Industrial Training. Huazhong University of Science and Technology Press, Wuhan, China, pp. 49-55.

 

Poon,S.K. (1988). Training in Tooling Technology. Proceedings of the Second International Conference on Modern Industrial Training. Nanjing, China, pp. C4-1 - C4-13.

 

Kwok, A & Chung, J, (2001). Training of Safety Auditors in Hong Kong. Paper in Chinese presented at 2001 Occupational Safety & Health Conference organized by Macao Labour Department.

 

Poon, S.K., Leung, K.T. & Fung, K.C. (2003). Factors Affecting the Planning and Implementation of Occupational Health & Safety Management System. Paper presented at the 12th International Conference on Safety Communities, 18-20 March 2003, Hong Kong.

 

WONG K.W., KWOK W.K, POON S.W. (2003), Safety Training and Education for the Construction Industry in Hong Kong . Paper presented at the Asia-Pacific region 3rd Conference of Construction Safety and Health Organization, 31 Mar-2 Apr 2003, Beijing

 

  

Visiting Fellows / Project Supervisors:

 

Wong, K.W., and Chan, A.P.C. (2001) Perception on Safety Structure and Safety Performance for Construction, Journal of Architecture Science Review, Vol. 44, No. 4, December, pp. 429-436.

 

Wong, K.W., and Tse, O.S. (2001) An Alternative Safety Performance Monitoring Tool: the Safety Sampling Method, Transactions, The Hong Kong Institution of Engineers, Vol. 8, No. 1, April, pp. 39-42.

 

Wong, K.W. (2000) Construction Safety in Hong Kong – the Development of Models for the Safety Performance Assessment of Major Contractors, South Bank University, England, September, 230pp. (Unpublished PhD Thesis).

 

Wong, K.W., Chan, C.M., Tse, Y.C., and Love, P. (2000) Improving Safety Knowledge Through Training – the Case of Hong Kong. The Journal of Construction Research, No.2, Vol. 1, pp. 169-175.

 

Poon, S.W., & Wong, K.W. (2000) Obstacles in Implementing Safety Management on Hong Kong Building Sites, The 6th Annual Conference of the Australian and New Zealand Association of Occupational Health and Safety Educators, Hong Kong, January, 6pp.

 

Wong, K.W. (2000) Safety Training – Enhancement of Safety Knowledge of Construction Workers in Hong Kong, 2000 Conference of Safety and Health Organisations in the Asia-Pacific Region Construction Industry, The Hong Kong Institution of Engineers, Hong Kong, 15pp (Invited Conference Paper).   

 

Poon, S.W., & Wong, K.W. (2000) Construction Accident Rate and Site Safety Management System: A Comparison of Some Asian Countries / Cities, The Hong Kong Institution of Engineers, February, 12pp (Invited Seminar Paper).

 

Wong, K.W., Poon, S.W., and Rowlinson, S. (1999) Construction Safety and Health Related Legislation in Hong Kong, 1999 Conference of Safety and Health Organisations in the Asia-Pacific Region Construction Industry, Japan Construction Safety and Health Association, Tokyo, Japan, May, 10pp (Invited Conference Paper).

 

Lo, K.K., Wong, K.W., and Chan, A P.C. (1999) Improvement to Construction Safety – Contributions and Liabilities of Building Professionals, Proceedings for the Construction Challenges into the Next Century Conference, the Hong Kong Institution of Engineers, Hong Kong, December, pp.106-111.

 

Wong, K.W., and Ding, C.H. (1999) Effective Implementation of the Site Supervision Plan System (SSPS) for the Building Industry in Hong Kong, Proceedings for the Construction Challenges into the Next Century Conference, the Hong Kong Institution of Engineers, Hong Kong, December, pp. 65-70. 

 

Chan, A.P.C., Wong, K.W., and Lo, K.K. (1999) Impact of Safety Programs on Project Performance, Proceedings of the 2nd International Conference of CIB W99, Hawaii, the U.S.A., March, pp. 825-831.

 

Wong, K.W., Chan, A.P.C., & Lo., K.K. (1999) Factors Affecting the Safety Performance of Contractors, Proceedings of the 2nd International Conference of CIB W99, Hawaii, the U.S.A., March, pp. 19-24.

 

Fang, D.P., Tso, H.N., Wong, K.W., and Fang, S.W. (1998) Insurance for Construction Accidents, Shanghai Insurance, Institution of Insurance in Shanghai, P.R.C., May, Vol.151, pp.13-15.

 

Chan, S.L., Wong, K.W., So., Y.S. and Poon, S.W. (1998) Empirical Design and Structural Performance of Bamboo Scaffolding, Proceedings of the Symposium on Bamboo and Metal Scaffolding, the Hong Kong Institution of Engineers, Hong Kong, October, pp. 5-15.

 

So, Y.S., & Wong, K.W. (1998) Bamboo Scaffolding Development in Hong Kong – A Critical Review, Proceedings of the Symposium on Bamboo and Metal Scaffolding, The Hong Kong Institution of Engineers, October, pp. 63-75.

 

Wong, K.W. (1998) Bamboo Scaffolding – Safety Practice for the Local Building Industry, Proceedings of the Joint HKCA/HKIE/HKIB Seminar at IBEX’98, Hong Kong, June, 8 pp (Invited Conference Paper).

 

Wong, K.W. (1998) Bamboo Scaffolding Safety in Hong Kong, In-house Training Seminar, Wui Loong Holdings Company Limited, Hong Kong, May, 10pp (Invited Seminar Paper).

 

Wong, K.W. (1998) Bamboo Scaffolding – Safety Management for the Building Industry in Hong Kong, Research Monograph, The Hong Kong Polytechnic University, April, 58 pp.

 

 

Books

 

Chung,J (1999). "塑膠業安全及健康守則""Plastics Factory Safety & Health Guide", Hong Kong Plastics Technology Centre, Ltd., U509, The Hong Kong Polytechnic University.

 

Kam,Y.K., Wong,W.Y., Chung,J., Ho,R., (1999), "Hands on Guide" - OHS Legal Guide, CCH Hong Kong Limited.

 

  

Safety Consultancy Projects/Reports

 

Poon S. K. and Chow L.Y. (2000). Report on Safety Management Review for Airport Authority Hong Kong

 

Chow L.Y. & Chan, C.S., Chung, J. and Kwok, W.K. (2001). Report on  “Initial Health & Safety Review” for Avery Dennison Hong Kong B. V.

 

Ma C. H. and Chung F. (2001). Expert Report for Paul Y. - ITC Construction Holdings Ltd.

 

Kwok W. K., Chow L. Y. and Chung F. (2001). Expert Report on Safety Guarding for Concrete Core Drill.

 

Chan C. S. (2001). Job Hazard Analysis and Risk Assessment for TQM Consultancy Company.

 

Lam T. (2001). Expert Report on a case of accident for Hip Hing Construction Co., Ltd.

 

Lam T. (2000) Expert Report on a case of accident for Hip Hing Construction Co., Ltd.

 

Poon, S.K., Chow L.Y., and K&M Consultancy Co. (2001). Safety Management Review Report for Sheraton Hong Kong Hotel & Towers.

 

Chung, J., Kwok, W.K. and Chow, L.Y. (2001). Accident Analysis Report on a case of injury for a solicitor firm.

 

Chan, C.S. and Chung, J. (2001) Consultancy service for Design and Implementation of Injury Management Training programme for a consulting firm.

 

Ma, C.H. and Tong K.H. (2002). Expert Report on a case of fatal accident for a solicitor firm.

 

  

Other Consultancy Projects/Reports

 

Fabriation of a precise model of the bridge with SLA for the Tsing Yi North Coastal Road Project and production of a multi-media teaching package illustrating the construction method of pre-stressed concrete bridge. Jan-April 2001.

 

Chan, C.S., Chow, Y.L., Chung,J., Kwok, W.K., Lam, T. and Poon, S.K.. (2001). Safety Auditors Training for a Department of the Government of the HKSAR.

 

Ma, C.H. and Tong K.H. (2001). Energy saving test Power Saver I and II.

 


 

 

Occupational & Environmental Safety Services Unit
The Industrial Centre
The Hong Kong Polytechnic University
Hung Hom, Kowloon, Hong Kong
Tel No: (852) 2766 7632    Fax: (852) 2334 4634

 

Privacy Policy Statement

Copyright statement

 

Last Modified: 8 January 2009

 

 Select search scope

  PolyU   Internet

 Enter the keyword to search

 

 

You are visitor No.Since 1 Sept 97